TecMig Welding (Jiangsu) Co.,Ltd

TecMig Welding Rods(15)
TecMig Welding Wires(21)

Showing 1 - 10 of 36, total 4 pages [First] [Previous] [Next] [Last]

tecmig silver 15% cooper brazing rods bcup-5
Specification: 2.4-4.0mm
Detail: Phos-Copper BCuP-5 15% Silver Flat Cooper Brazing 15 Bare Rod AWS A5.8 BCuP-5 BCuP-5 is a phos-copper-silver alloy ideal for most copper-to-copper or brass joints where close fit-up does not exist and w...

tecmig silver 5% cooper brazing rods bcup-3
Specification: 2.4-4.0mm
Detail: Phos-Copper BCuP-3 5% Silver Flat Cooper Brazing 5 Bare Rod AWS A5.8 BCuP-3 BCuP-3 is a phos-copper-silver alloy suitable for most copper-to-copper or brass joints where close fit-up cannot necessarily be ma...

tecmig phosphor cooper brazing rods bcup-2
Specification: 2.4-4.0mm
Detail: Phos-Copper BCuP-2 Flat Cooper Brazing Bare Rod AWS A5.8 BCuP-2 BCuP-2 Phos-Copper (BCuP-2) low cost alloy is suitable for most copper-to-copper or brass joints where good fit-up exists, and the assemblies are...

tecmig submerged arc welding wires el12
Specification: 2.4-4.0mm
Detail: EL12 AWS A5.17 EL12 Approved by: ABS CCS LR GR NK BV DNV Description£º EL12 is a copper coated mild steel wire for Submerged Arc Welding (SAW) of mild and medium carbon structural steels. Co...

tecmig submerged arc welding wires eh14
Specification: 2.4-4.0mm
Detail: EH14 AWS A5.17 EH14 Approved by: ABS CCS LR GL BV DNV Description£º EH14 is a copper coated carbon steel Submerged Arc Welding (SAW) contains high level of manganese, the bead metal with excell...

tecmig submerged arc welding wires em12k
Specification: 2.4-4.0mm
Detail: EM12K AWS A5.17 EM12K Description£º EM12K submerged arc wire contains higher levels of carbon, manganese and silicon than EL12. The increased carbon content gives this wire greater tensile strength, while ...

tecmig gasless stainless steel flux cored wires e316lt0-3
Specification: 0.6-1.2mm
Detail: Description£º E316LT0-3 is a self-shielded, flux cored, stainless steel wire designed with a nominal weld metal composition of 19% chromium, 12.5% nickel, 2.5% molybdenum and a maximum carbon content of 0.03%. The Mo contai...

tecmig gasless stainless steel flux cored wires e308lt0-3
Specification: 0.6-1.2mm
Detail: E308LT0-3 AWS A5.22 E308LT0-3 Description£º It is self-shield, flux cored, stainless steel wire is designed with a nominal weld metal composition of 21% chromium and 10% nickel with a maximum carbon content ...

tecmig gasless flux coredd wires e71t-11
Specification: 0.6-1.2mm
Detail: E71T-11 AWS A5.20 E71T-11 EN ISO17632-A-T42 ZZZ N 1 Description£º E71T-11 is an all positional, self-shield flux cored wire suitable for multipass welding, can be used vertical down welding. With good wel...

tecmig -40¡æ flux cored wires e71t-1j
Specification: E71T-1J
Detail: E71T-1J AWS A5.20 E71T-1J AWS A5.36 E71T1-C1/M21A4-CS1-H8 EN ISO 17632-B T42 4 P C 1 Description£º E71T-1J has better low temperature i***ct performance @-40.


Showing 1 - 10 of 36, total 4 pages [First] [Previous] [Next] [Last]
1 2 3 4