TecMig Welding Wires

TecMig Welding Rods(15)
TecMig Welding Wires(21)

TecMig Welding (Jiangsu) Co.,Ltd

All Products >> TecMig Welding Wires

Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]

tecmig high tensile flux cored wires e81t1-ni2
Specification: E81T1-Ni2
Detail: E81T1-Ni2 H4 AWS A5.36 E81T1-Ni2 H4 Description£º E81T1-Ni2 is designed for gas shielded flux cored welding of low alloy steels that require good CVN toughness at low temperatures. It is excellent for single...

tecmig high tensile flux cored wires e81t1-ni1
Specification: E81T1-Ni1
Detail: AWS A5.29: E81T1-Ni1M-JH4 AWS A5.36 E81T1-M21A6-Ni1-H4, Description£º E81T1-Ni1 is designed for gas-shielded flux cored welding of low alloy steels that require good toughness at low temperatures. This alloy is e...

tecmig gasless flux coredd wires e71t-gs
Specification: E71T-GS
Detail: E71T-GS AWS A5.20 : E71T-GS AWS A5.36 : E71T14S-AZ-CS3 ISO 17632-A : T42 Z Z V N 1 Description£º E71T-GS is an all positional, self-shield flux cored wire suitable for single pass welding, can be used...

tecmig gas shield flux cored wires e71t-1c/m
Specification: E71T-1C/M
Detail: E71T-1C/M AWS A5.20 E71T-1C/M AWS A5.36 E71T1-C1/M21A2-CS1-H8 EN ISO 17632-B T42 0 P C 1 Description£º E71T-1C/M is a Co2 & mixed gas dual use flux-cored wire used for all positional welding, can also be us...

tecmig low alloy high tensile mig welding wires er80s-ni1
Specification: ER80S-Ni1
Detail: ER80S-Ni1 AWS A5.28 ER80S-Ni1 Description£º ER80S-N1 is a low alloy copper-coated tig rod with 0.5% Mo content designed for welding low-alloy steels with high tensile strength and creep resistance. It shows ...

tecmig low alloy high tensile mig welding wires er120s-g
Specification: ER120S-G
Detail: AWS A5.28 ER120S-1 Description£º ER120S-G is cooper coated low alloy solid wire for welding high strength steels with yield strength up to 890***. Can be used as well as for welding grade S960 and featured with ...

tecmig low alloy high tensile mig welding wires er110s-g
Specification: ER110S-G
Detail: AWS A5.28 ER110S-G Description£º ER110S-G is cooper coated low alloy solid wire for welding high strength steels with yield strength up to 890***. Can be used as well as for welding grade S960 and featured with good...

tecmig low alloy high tensile mig welding wires er100s-g
Specification: ER100S-G
Detail: ER100S-G AWS A5.28 ER100S-G Description£º ER100S-G is a cooper coated low alloy welding wire with a nominal composition (wt-%) of 1.5 Mn, 0.45 Mo, 0.25 Cr, with less than 1% Ni. It is designed for welding s...

tecmig low alloy high tensile mig welding wires er80s-d2
Specification: ER80S-D2
Detail: AWS A5.28 ER80S-D2 Description£º ER80S-D2 is a low alloy copper-coated tig rod with 0.5% Mo content designed for welding low-alloy steels with high tensile strength and creep resistance. It shows good i***ct strengt...

tecmig mild steel mig welding wires sg3 g4si1
Specification: ER70S-6
Detail: G4Si1 AWS A5.18 ER70S-6 EN ISO 14341-A : G 38 2 C1/M21 Z 4Si1 Approved by: ABS BV CCS DNVGL LR CE DB T&©|220;V Description£º A gas shield copper coated carbon steel welding wire for fabrication of mi...


Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]
1 2 3

TecMig Welding (Jiangsu) Co.,Ltd All Products >> TecMig Welding Wires

TecMig Welding (Jiangsu) Co.,Ltd

All Products >> TecMig Welding Wires